Check out the most energy-efficient electric models from Bradford White - AeroTherm. The AeroTherm is the series of Bradford White heat pumps, a new name in the already extensive line of water heaters.
The heat pump is also known as the high-efficient hybrid unit that combines the heat pump technology and features of the electric water heaters, designed to provide plenty of hot water for less.
Bradford White heat pumps come in two sizes, RE2H50R10 with the 50 gallons capacity and RE2H80R10B with the 80-gal tank, both designed to heat water efficiently with the reduced energy losses. The heat pumps cover all types of homes, from small and mid-size to large, with the high hot water demand.
The heat pumps can provide significant energy and money savings due to the ability to take advantage of the warm surrounding air. The warm air is used for preheating, so the heating elements are engaged less, making the units Energy Star compliant.
The maximum energy factor is 3.25, so when comparing to the conventional-type electric heaters whose energy factor is close to one, savings of the heat pumps are obvious.
Like most heat pumps, the AeroTherm comes with four operating modes, which brings more flexibility to its users.
Homeowners can choose vacation mode when away or electric mode when more energy is needed.
The heat pump mode allows maximum energy savings because only the heat pump is used (it draws the heat from the air to heat water), while the heating elements are not engaged. This mode is recommended for use in warm and mild climate regions where the ambient temperature provides enough heat for the efficient water heater operation while cooling the surrounding air at the same time. While in the heat pump mode, the energy efficiency is the highest while the recovery is slower.
The hybrid operating mode combines the heat pump and two electric heating elements with up to so users can take advantage of the fast recovery during the long draws of hot water.
The electric mode allows the hybrid unit to operate as the electric water heater only since the heat pump is not used. This is the least energy-efficient mode, but it has the fastest recovery time.
Bradford White heat pump also uses the vacation mode that operates only to keep the water inside the tank warm enough so it doesn't freeze during the cold winter months. It keeps the temperature low, around 50 F, and can be programmed to protect the unit for 3-14 days. It turns on a day before your return so that hot water is ready.
The operating modes can be controlled and set by using the control panel located at the upper front of the unit. The control panel is user-friendly, and it allows you to set the temperature or set the operating mode. It also gets the diagnostic information for easy troubleshooting, including the error codes (F1, F2…), the number of days in vacation mode, and temperature settings, all shown on easy to read LED display.
The actual operating mode is visible on one of the LED diodes. The service mode can also be accessed by using the provided buttons. This is where you can view Thermistors, heating components status, and view faults and counters.
Many users of heat pumps and from other manufacturers complain about the noise of the heat pump blower, but this is not the case with the AeroTherm, it has a quiet operating blower with a noise level of approximately 55 dBA.
For easy installation and maintenance, the water connections are located at the top of the unit. The water connections are standard ¾" size, dielectric type for longer water heater life.
Since the heat pump is installed at the top, this is where the air filter keeps the unit clean from the dust and pollutants, it is washable, and when it is dirty, the system automatically alerts the user with the audio alarm. The clean filter also helps in keeping the efficiency high.
Bradford White heat pump comes with a warranty of 10 years.